Summary: This laboratory reviews some mechanics related to the use of the Computer Science Linux Network for CSC151. Specifically, this lab discusses:
Please don't be intimidated! Although this lab contains many details which may seem overwhelming at first, these mechanics will become familiar rather quickly. Feel free to talk to the instructor or with a Linux User Consultant if you have questions or want additional help!
Short Version
To use any of the computers on Grinnell's Linux network, one must log in, identifying oneself by giving a user name and a password. You will have received a Linux user name and password from the instructor if you did not already have one. If you have not received a Linux user name and password, or if you have forgotten either one, please tell your instructor.
When a Linux workstation is not in use, it will display a login screen with a space into which one can type one's user name and, later, one's password. (If the workstation's monitor is dark, move the mouse a bit and the login screen will appear.) To begin, move the mouse onto any part of the box containing the login box. Type in your user name, in lower-case letters, and press the <Enter> key. The login screen will be redrawn to acknowledge your user name and to ask for your password; type it into the space provided and press <Enter>. (Because no one else should see your password, it is not displayed on screen as you type it in.)
At this point, a computer program that is running on the workstation consults a table of valid user names and passwords. If it does not find the particular combination that you have supplied, it prints a brief message saying that the attempt to log in was unsuccessful and then returns to the login screen -- inviting you to try again. Consult the instructor or the system administrator if your attempts to log in are still unsuccessful.
Short Version
Once you have logged in, a control panel will appear at the bottom of the screen. Some other windows also may be visible in other parts of your screen. All of these areas are managed by a special program, called a windowing system. On our network, login chores and other administrivia are handled by a program or operating system, called Linux, and the primary user interaction is handled by a windowing system, called Gnome.
Short Version
While some materials for this course will be available in paper, almost everything for this course (including electronic versions of paper materials) will be available on the World Wide Web. In this class, we use a version of the Firefox browser called Iceweasel. Almost all of the materials for this course will be distributed over the Web. To use Iceweasel to view materials, such as this course's syllabus and this lab, you may follow these steps:
First, prepare to use the World Wide Web by clicking on
the Iceweasel icon (the picture with small white creature
holding a green sphere). Iceweasel is a version of Mozilla
Firefox renamed to accommodate trademark issues. More info
on the relationship between Firefox and Iceweasel can be found at
http://en.wikipedia.org/wiki/Naming_conflict_between_Debian_and_Mozilla.
I will generally use the terms interchangeably.
Unfortunately, Iceweasel takes a really long time to start (several minutes!) the first time you use it. After you click the icon, go on to the next section.
Short Version
While we can run several programs directly, we will need to invoke others by name. The computer program that reads and responds to such invocations is called the shell, and your interactions with the shell takes place in a window generated by a program called a terminal emulator, or terminal for short.
You may already have a
You type in such instructions using the keyboard. Move the mouse pointer
into the
To get rid of the control
)
and <Alt> (alt
or meta
) are somewhat like
<Shift> keys, in the sense that they modify the effect
of other keys that are pressed simultaneously.) The shell program
interprets <Ctrl/D> as a signal that you have no more
instructions for it and halts, and the terminal emulator closes the
window automatically once the shell stops running. Alternatively, you
may close a window by moving the mouse to the
at the top-right of the window, and clicking the left mouse button.
Finally, you can usually type exit to close a terminal window.
It is a good idea to change the password associated with your account
shortly after you receive it and every few months thereafter. The program
that one uses to change one's password is by its name,
.
yppasswd
Choose a new password. Make it something that you can easily remember, but not an English word or a name, since it is easy for system crackers to break in by guessing your password if you choose it from one of those categories.
Open a terminal window, select the window by clicking the left mouse button in it, and type the word yppasswd. The password program prompts you once for your old password -- the one you logged in with -- and twice for your new password. If you give your old password correctly and the two copies of your new password match, the program substitutes the new password for the old one in the table that the login program consults. The old password is discarded and will not be recognized in subsequent logins. (If the attempt to change the password fails for any reason, however, the old password is retained.)
A typical interaction to successfully change a password looks like this:
bourbaki% yppasswd
Changing NIS account information for user on hopper.math.grin.edu.
Please enter old password:
Changing NIS password for user on hopper.math.grin.edu.
Please enter new password:
Please retype new password:
The NIS password has been changed on jacobi.math.grin.edu.
bourbaki%
After running the yppasswd program, the shell takes over again and issues another prompt. You can invoke as many programs as you like from the shell, one after another, before pressing <Ctrl/D> or exit to leave the shell.
As you've probably heard by now, we are making algorithms for creating and manipulating images a central central theme of this course. The program that we are using to do image manipulation is called The GNU Image Manipulation Program, typically referred to as The Gimp. Of course, we also need a language in which to express those algorithms and an environment in which to write those algorithms. The Gimp comes with a language, called Script-Fu, for writing algorithms. Unfortunately, the environment for writing programs in the Gimp is, to put it politely, rough. In response, we've written our own environment, using a pedagogical program development environment called DrScheme. We call our hybrid DrFu.
Your first task in getting DrFu running correctly is to add an icon to the task bar. (Almost as importantly, once you figure out how to add a DrFu icon, you will also be able to add other applications that you want to use.)
Short Version
Dr-Fu.
Most user interface systems provide a convenient way to access commonly-used applications. In Gnome, we often add such applications to the Task Bar. To add an application to the task bar, we need to tell Gnome about where to find that application and what icon to associate with the application. (We can tell it other things, too, but that's enough for now.)
I will admit that I have not found an elegant way to automate the
addition of an icon to the panel, so we'll do it by hand. You first
tell the panel that you want to add something by right clicking in an empty
area of the panel and then selecting .
(The ellipses tell you that you should expect to provide more information.)
We're going to add an application launcher for a locally-developed
application, so we must create a custom application
launcher. Click on the
option and then click . The
You will note that this window gives you about seven things to set up
for the launcher. The Name is what we use to refer to the application.
In this case, we'll use "DrFu". The launcher shows this name when
you pause the cursor over the icon for the application. We will not
worry about the generic name. The Comment is additional information about
the application, and also appears when you pause the cursor over the
icon for the application. We'll use Media Program Development
here, but you can
choose other text that you find helpful.
The Command is the most important thing to fill in. The command tells the launcher how, in particular, to start your program. Typically, we tell it where the program can be found and, in some cases, provide additional information on how to launch it. Since we're using DrFu you should enter the following
/home/rebelsky/glimmer/bin/drfu
Finally, it is convenient to associate an icon with the application.
If you click the button (which certainly
has a strange name), you'll be presented with a wide variety of possible
icons. You may certainly choose one of these. However, for uniformity
we recommend that you use the custom icon for this version, which
is in a different location on the computer than the system first looks.
You'll need to enter /home/rebelsky/glimmer/pixmaps/ to
tell it where to look, and then select an appropriate icon.
You're almost done. You've chosen the name, description, command, and
icon. You now need to click to accept the
new button, confirm that it appears, and then close the
Now it's time to start DrFu. Click on the icon. As we mentioned earlier, DrFu is a version of DrScheme customized for use with the Gimp and Script-Fu. Because DrScheme can work with a variety of languages, you'll need to choose one. Select (there are those ellipses again) and then double click on under . That should be enough to convince DrFu to work correctly, but we need to quit and restart before we can do anything else. It's also likely that you'll have to quit the Gimp before restarting DrFu.
Why do we have to select a version of Scheme? Because as the Scheme
Programming Language has evolved, a few dialects have evolved. (You
certainly expect that dialects exist for human languages; it turns out
to happen for computer languages, too.) The DrScheme environment also
has a few versions that include additional built-in
functions
and a few versions that are simplified for novice programmers. The
fact that DrScheme permits multiple languages is actually quite helpful -
we wouldn't be able to have DrFu without it.
Short Version
Hopefully by now you are starting to see some response from Iceweasel.
The first time you run Iceweasel on our network, two message boxes might appear.
You should approve of any requests by clicking on the appropriate word. The pop-up boxes then disappear; you should not see them on subsequent uses of Iceweasel.
Initially, Iceweasel displays a World Wide Web document containing
some default information. You should switch to the page
http://www.cs.grinnell.edu/zero-one.xhtml, which is an entry
point to the Computer Science Department's Web site.
I expect that most of your are already familiar with a Web browser. If not, please consult with me or one of your colleagues.
To find material for this course, scroll down the origin
page
for the Computer Science Department to the list of course front doors.
Now scroll down this page to find the entry
for this course, Fundamentals of Computer Science I, Section21,
and click on it to locate the front door for this course. Next, click
on the Syllabus link to view the current draft of the
semester's schedule. If you click on the Current link,
you'll see an outline of today's class.
You can also connect to the Web page for this class by selecting
from the
menu and then entering
http://www.cs.grinnell.edu/~rebelsky/Courses/CS151/2007F/
Short Version
Each Linux user can configure Iceweasel to reflect her or his own preferences. Between logins, these preferences are stored in a file in the user's home directory; when Iceweasel is started during a later session, they are reinstated from that file.
Every user of Iceweasel in this class should establish a base page, a starting point for browsing. Here are the Uniform Resource Locators or URLs of some good choices:
http://www.cs.grinnell.edu/~rebelsky/Courses/CS151/2007F/.
http://www.cs.grinnell.edu/~rebelsky/Courses/CS151/2007F/Outlines/current.hmtl.
http://www.cs.grinnell.edu/zero-one.xhtml
http://www.grinnell.edu
http://mail.grinnell.edu
To establish your base page, within Iceweasel, bring up the
menu from the menu bar and select the
operation. A pop-up window appears,
allowing you to configure many features of the general appearance
of Icewesael. Choose the option, if it
has not been chosen already.
The rectangle labeled Home Page
contains the
URL of some document that serves as the default.
Replace the contents of this rectangle with the URL of your choice.
(This does not have to be a permanent change; you can change your mind
about this configuration at any time within Iceweasel.)
To erase the current contents of the Home Page Location(s)
box, move the mouse pointer to the left of the first character in the box,
press the left mouse button and hold it down, and drag the mouse pointer
rightwards until the entire URL is displayed in reverse video,
white letters on a black background. Then release the left mouse button
and type the new URL; the old one will vanish as soon as you start typing.
Once you have entered the new URL, move the mouse pointer onto the button
marked at the bottom of the pop-up window and
click on it with the left mouse button.
You can, of course, simply navigate to the page you want to use as your home page and then click on .
You may note that the button says Pages
(plural) rather than
Page
(singular). Since Iceweasel permits tabbed browsing (that
is, you can have tabs
within the same window that you switch
between), you can have a home set of tabs. Particularly obsessive
people might want to set up a sequence of tabs with say,
the current outline,
the current eboard,
the current reading,
the current lab, and
Plans (for when you get bored).
If you've successfully logged in, changed your password, started Iceweasel, selected your base page, created an icon for DrFu, and started DrFu, you've completed the lab and you can finally stop.
Short Version
When you are done using a workstation, you must log out in order to allow other people to use it. To log out, move the pointer onto the menu icon near the left of the front panel, click the left mouse button, and select the option. A confirmation box will pop up, asking you to verify that you're ready to log out; move the pointer onto the word near the bottom of this box and click the left mouse button. The Gnome windowing system vanishes, and after a few seconds the login screen reappears; this confirms that you're really logged out.
Please do not turn off the workstation when you are finished. The Linux workstations are designed to operate continuously; turning them off and on frequently actually shortens their life expectancy.
Janet Davis (davisjan@cs.grinnell.edu)
Created August 28, 2007 based on http://www.cs.grinnell.edu/~rebelsky/Courses/CS151/2007F/Labs/linux-lab.html